Anion Generator 15kv

Anion Generator 12vdc Input 15kvdc Output

15kvdc anion generator
15 kvdc output anion generator

A static field – also called anion – generator used to make a DIY static  grass applicator with full instructions on how to make your own.

Below is a video and text information about this 12vdc input static field generator.

Anion Generator Quick Links

If you click here, you can buy one of these anion generators.

If you click here, you can buy a complete kit to make your own DIY static grass generator.



Anion Generators For Static Grass Applicators

It is best to use a static field generator, also known as in anion generator, that creates a large static field. That is because you want the grass to stand straight up.

If you have something that generates a field of 10 to 15 kV DC, you will get much better performance and a much better grass lay than you will if you use something made from a flyswatter or something with 4 to 8 kV DC output.

Not only does the grass stand straight up eliminating all those unsightly fibers lying flat in the glue, because of the high powered draw by the grass container, you don’t have grass flying all over the place. If you watch in the video below you see how the grass is localized in the area of the glue. You don’t have to go all with a vacuum cleaner after you’re done.

This anion generator has a single output lead and a special grounding lead to ensure that you get a full and effective 12 to 15 kV static field. We had it designed that way so it would be most effective in a static grass generator.

This negative ion generator, also known as an anion generator, was designed specifically to be used in static grass applicator’s. It can, of course, be used in any other application that requires a static field of 12 to 15 kV.

A large number of other negative ion generators are designed to be used in air conditioners, vacuum cleaners and other air purification equipment.

This unit differs in that the wiring is such that there is a single lead on the output side which leads is to be attached to the static grass container. The voltage on that lead reaches -15 kV DC.

There is a green lead that is the ground lead to be used to connect to the surface on which the static grass is being applied. Making such a connection assures full potential and best utilization of the maximum voltage output. That makes the grass stand up very well.

A unique feature is that the voltage output on this unit will vary between 6kV DC and 15 kV DC.

When we designed this, we took into consideration feedback from beta testers that sometimes it might be useful to work with lower output voltages or lower input voltages. As a result, you can use any input voltage from 5vDC to 12vDC. The output will vary from 6kvDC to 15kvDC. The higher the input voltage, the higher the output voltage.

So you have a lot of flexibility for your application.

Below the pictures is some technical information which you should be sure to read.

anion generator 15kvanion generator 15kv DCanion generator 15kvDC Output
anion generator 12v DC to 15kvanion generator 12v DC input to 15kv output

Input: 12vdc

Output:  6kvdc -15kvdc  – depends on input voltage – 5vdc to 12vdc

Size – Body 6 x 3 x 4 cm — Base 8 x 4.5 x .3 cm

Ships From Europe And US

Model Number – TBF-yd12122

Weight – 109 grams

Wire Lengths – 30 cm

Anion Generator Useful Links

If you click here, you can buy one of these anion generators.

If you click here, you can buy a complete kit to make your own DIY static
grass generator.

Scroll to top