DIY Prestige Static Grass Applicator

About the Prestige static grass applicator kit by StaticGrassKing.

Prestige Static Grass Applicator
Prestige Static Grass Applicator

This page provides detailed information about the Prestige static grass applicator kit that you can buy at this link.

You can buy the Economy model StaticGrassKing static grass applicator at this link.

You can buy the Static Grass King anion static field generator used in these kits to build your own version of a static grass applicator kit at this link.

When you invest in a static grass applicator you are investing in the appearance of the scenery on your layout. And that is a critical  investment.

In the information that follows we want to provide you as much information as possible so that when you make your investment you are fully informed and are assured that you are making the right decision.

Read The All Important Customer Reviews By Clicking Here.

Description

The StaticGrassKing is a powerful, plug and play, 15 KV static field generator that you configure to make your scenery just the way you want to.

You can use the StaticGrassKing to make scenery, dioramas, flocking, wargaming scenes, grass tufts, wire grass trees, flowers, weed beds, flower beds and patches.

It is portable and power adjustable. Input voltage can be anything from 4 to 12 V DC. Output voltage will vary according to the following table.

 

Input vDC 4 5.8 5.6 7.5 8.6 9.9 10.9 11.9
Output -Kv 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5

Your power supply can be batteries, a power pack, your train layout track, a discarded electronic gadget power supply.

You plug in your power supply, grounding wire, and grass container using banana clips which are supplied with the StaticGrassKing power unit.

Just plug them in and start playing with grass.

Benefits Of The Design

15kv Static Field – More powerful than many commercial static grass applicators

Versatile – Change grass containers to suit the task at hand. Use one type container for large areas, another for fine detail work, another to make wire tree branches and so on. Look at useful tools here.

Modular – The grass container can be small and light without integral electronics and switches. Result – you have better control and easier grass laying, adding branches to wire trees, making weeds and grass patches and tufts.

Separate Grass Container – Grass is easily changed without having to handle entire grass applicator.

Work Under Low Areas – Using a tea strainer grass dispenser allows you to add grass under areas where a shaker type applicator cannot be used.

Flat Surfaces – The control unit stays in place.  It does not roll around table.

Low Cost – You don’t have to pay for the power supply or grass container. You probably already have something that can be used.

Voltage Control – Unique variable input to output voltage control allows you to work at output voltages as low as 7.5 kilo volts DC

Safety – 12vDC input so that you do not have to work with 110v or 220v power.

Certification – The electronics are European Union Certified.

 

Included In The Kit

Engraved parts for 1 laser cut  box.  Your  or your organization’s name can be engraved on the cover.

1 StaticGrassKing Anion Generator

6 Solderless connectors

4 Banana clip plug and receptacle pairs

2 Pieces shrink tube

1 Auxiliary power receptacle

1 Alligator clip for ground wire

1 Switch

Instruction Guide Book

Free Technical Assistance

You must supply the grass dispenser, grounding wire and power source.

 

 

Specifications

Brand – StaticGrassKing

Country Of Origin – Poland

Box Dimensions – 12.5 cm by 1.5 cm by 4.4 cm

Weight –  267 grams

Box Material –  3.1 mm MDF

Anion Generator StaticGrassKing variable input and output +4 to +12 v DC input with output 7.5 to 15 kv DC output static field.

Power Requirements – This is not a transformer.  It does not pass current.  It is a static field generator.  So .2 amp to 5 amp input source is sufficient.

European Union Certified – For your safety and reliability, the generator complies with European Union regulations for static field generators.

How To Build A Static Grass Applicator From This Kit

What You Must Supply

About 2 meters of 18 to 22 gauge wire.

12 v Power supply and grass dispenser which we recommend to be a small tea strainer.

What You Must Do

You have to glue together a laser cut box, crimp some solderless connectors, trim some wire with wire cutters, connect wires according to detailed instructions and tighten some nuts.

Here are two resources for you.

Download a complete illustrated text step by step guide by clicking on  How To Build The Prestige Static Grass Applicator.

And there is also a complete tutorial with video here.

If you have questions or need more information, contact us here.

Scroll to top