About the StaticGrassKing static grass applicator kit
|Proven Popular Among Our Visitors|
|Buy Used HOm Engines|
Very Used Is Fine. Click If You Have Something To Sell
|Installing And Using DCC|
Read a setup and operation guide.
|The How To Guide|
Building model train layouts.
|Online Model Train Clubs|
Visit to learn what is available
|Model Railroading Resources|
Something Useful For Every Modeler
What is the StaticGrassking static grass applicator kit?
This kit saves you money. It is a low cost way to get your own powerful StaticGrassKing static grass applicator.
What Is The StaticGrassKing
The StaticGrassKing is a powerful, plug and play, 15 K VDC static field generator that you configure to meet your exact needs.
You configure it by adding your own grass container (such as a tea strainer) and power supply.
The StaticGrassKing can be used to make scenery, dioramas, flocking, wargaming scenes, grass tufts, wire grass trees, flowers, weed beds, flower beds and patches.
It is portable and power adjustable. Input voltage can be anything from 4 to 12 V DC. Output voltage will vary according to the following table.
Your power supply can be batteries, a power pack, your train layout track, a discarded electronic gadget power supply.
You plug in your power supply, grounding wire, and grass container using banana clips which are supplied with the StaticGrassKing power unit.
Just plug them in and start playing with grass.
Watch the StaticGrassKing in action here.
- A 15kv static field with its unique configuration makes it a more powerful static grass applicator than many much more expensive commercial applicators.
- Versatile – Change grass containers to suit the task at hand. Use one type container for large areas, another for fine detail work, another to make wire tree branches and so on.
- Modular – The grass container can be small and light without integral electronics and switches. Result – you have better control and easier grass laying, adding branches to wire trees, making weeds and grass patches and tufts.
- Separate Grass Container – Grass is easily changed without having to handle entire grass applicator.
- Low Cost – You don’t have to pay for the power supply or grass container. You probably already have something that can be used.
- Flat Surfaces – The control unit stays in place. It does not roll around table.
- Uses a static field generator especially designed for static grass applicators.
- A powerful 12 v DC input with 15KV static field output unit that makes laying grass easy. No grass flying all over the place.
- Unique variable input to output voltage control allows you to work at output voltages as low as 7.5 kilo volts DC
- 12vDC input so that you do not have to work with 110V or 220V power.
- The electronics are European Union Certified.
The above is a summary of the benefits. The full explanation of the benefits can be found here. Benefit Details
Power Unit Container – Polystyrene box with easy access to the interior.
Dimensions – 13.2 x 13.2 x 4.2 cm
Weight – 310 grams
European Union Certified – For your safety and reliability, complies with European Union regulations for static field generators.
Included In The Kit
• 1 GrassKing 12vDC input nominal 12-15kvDC output Static Field Generator
• 1 Stryren Control Box
• 4 Bannana Clips With Bannana Clip Sockets
• 4 Solderless Wire Connectors
• 1 Power ON/OFF Switch
• A lot of Great Service, Backup, and Help from a small company in Poland that appreciates its worldwide customers.
The StaticGrassKing Anion Generator
The Control Box
The Step By Step Instructions
Everything In Place
The Completed Kit
With Your Modules
StaticGrassKing And Scenery
Here are some examples of scenery that you can make with the StaticGrassKing.
To learn how to make scenes like those you see above, watch our video tutorials.
Comments About the StaticGrassKing
Here are a few typical comments. There are many more.
“Just tried it out fantastic great kit very versatile” – MC
“Listen to this man don’t buy the cheap electric flyswatter they are under powered.” – BB
“The most effective static grass applicator in YouTube.” – PS
“It works! I have a Noch Grassinator, a Flockbox a flyswatter static grass applicator and I bought the Grassking Static Field Generator and it is by far the best I have used and it is the most versatile. My train group has been converted to using the Grassking pictured here. We have had excellent results using it and I would highly recommend it to anyone working with static grass! The service has also been great. It comes with excellent instructions. I have bought the kit which goes together very quickly and one diy for another project. Both have worked flawlessly.” – B
Buy This Kit Now. Click here.
Explanation Of Benefits
Makes A More Powerful Static Grass Applicator Than Many Much More Expensive Commercial Applicators.
This is probably best explained by offering you the opportunity to read the comments from one of our satisfied users.
Begin Comments – “It works! I have a Noch Grassinator, a Flockbox a flyswatter static grass applicator and I bought the Grassking Static Field Generator and it is by far the best I have used and it is the most versatile.”
My train group has been converted to using the Grassking pictured here. We have had excellent results using it and I would highly recommend it to anyone working with static grass! The service has also been great. It comes with excellent instructions. I have bought the kit which goes together very quickly and one diy for another project. Both have worked flawlessly!
Thank you Gary. The machine is our favorite. One of the two I ordered was for a man who did electronic repair for a living!
Our group loves them. We call my original one the Death Star! We are now using a 7.5 volt regulated power supply.
It still puts out a great charge! We really like them and I’m sure there will be more orders from us. We used the third one with a regulated 7.5 regulated power supply and it worked great!
My train group is really impressed with the generator.” – End Comments
Low Cost, DIY, Easy To Assemble Unit That Makes It Affordable For You To Have Your Own Powerful Static Grass Applicator.
You get everything necessary to make the field generation unit for your static grass applicator. All that you have to do is add a vegetable strainer and some form of power supply, such as a discarded electronic device charger. The complete list of what is included in the kit is at the bottom of this information.
Assemble your own static grass applicator in about one half hour. No soldering or special tools required!
All that you have to do is drill a couple holes and connect wires. You do not have to do any soldering because all the connectors are solderless.
Here is a video of a DIY static grass applicator, that was made using this anion generator.
Uses a static field generator especially designed for static grass applicators.
Use the right tool for the right job.
A large number of other negative ion generators are designed to be used in air conditioners, fly swatters, vacuum cleaners and air purification equipment.
The negative ion generator/anion generator used in this unit was designed specifically to be used in static grass applicators. It can, of course, be used in any other application but its main purpose is to power versatile, quality static grass applicators.
With it you can make a static grass applicator that will outperform most of the static grass applicators on the market.
A powerful unit that makes laying grass easy. No grass flying all over the place.
The higher the static field, the more pull there is to make the grass stand up just where you want it. No more wasted grass flying all over the place.
For you that means that you won’t have grass laying down in the glue. And you won’t have to go over your work with a vacuum cleaner to stand the grass up – a process recommended by many people using other applicators.
And, if you are going to make grass tufts ( “everyone” does ) or flowers ( many do ), you want your grass standing as straight and high as possible. That goes for short grass that you will top with scatter to make weeds.
Free, complete, illustrated book on how to make static grass applicators included as a bonus.
You get a fully illustrated, step-by-step guide to making static grass applicators included with your kit. It has pictures and links to videos so you can even customize this already versatile unit. Using this guide, it is just a matter of following the simple steps to have your great static grass applicator.
Prompt and reliable delivery. Ships to North American customers from the US by Amazon. Ships to European customers from Poland by Global Express.
To give you reliable and speedy delivery we utilize the services of well known companies such as Amazon to deliver your product to you.
Packaged, ready to deliver kits are stored in Amazon warehouses in the US and shipped by Amazon to our north American customers. (3 – 5 days delivery)
For those located in Europe and other parts of the world we ship from a special shipping facility in Europe using global express shipping services. Your delivery is reliable and prompt. (5-7 Days Europe)
Unique variable input to output voltage control allows you to work at output voltages as low as 7.5 kilovolts DC.
When we designed this, we took into consideration feedback from beta testers that sometimes it might be useful to work with lower output voltages or lower input voltages.
So you get a unit whose output voltage varies with the input voltage. With a 12vDC input, output is a nominal 12 to 15kv DC.
You can use any input voltage from 4vDC to 12vDC. The output will vary from 6kvDC to 15kvDC. The higher the input voltage, the higher the output voltage.
So you have a lot of flexibility for your application.
12vDC input so that you do not have to work with 110V or 220V power.
When working with electricity, safety should always be your first concern!
Simply stated, it is better to work with a 12vDC low current source than a 110 or 220vAC high current source.
And as a practical matter, 12vDC is all around your layout. You can connect to your power pack, the track, accessory bus, etc.. Whatever is convenient.
There is no need to be hauling an extension cord around just so you have 110 or 220vAC for your static grass applicator.
Get the StaticGrassKing. Click here.
Get a kit to build the StaticGrassKing. Click here.
Get a negative ion generator to freelance build your own DIY static grass applicator. Click here.
If you have questions, comments or have information that can be added here, please use the form below.
[wpforms id=”949" title=”false” description=”false”]
[w[wpforms id=”949" title=”false” description=”false”]p>