About the powerful and versatile, low cost, DIY easy to assemble static grass applicator kit that make it affordable for you to have your own powerful static grass applicator. With it you can assemble your own static grass applicator in about one half hour. No soldering or special tools required.
Get a free copy of our illustrated guide on how to assemble this applicator by clicking here.
Features
- -15 kv DC static field generator makes a more power static grass applicator than many much more expensive commercial applicators.
- Uses a static field generator especially designed for static grass applicators.
- A 12 v DC input with 15 kv static field output unit that makes laying grass easy. No grass flying all over the place.
- Unique variable input to output voltage control allows you to work at output voltages as low as 7.5 kv DC.
- 12v DC input so that you do not have to work with 110 or 220 v power.
- The electronics are European Union Certified.
- Operates on voltage inputs from 4.5 to 12.2 volts DC
- Connects to standard 2.5 mm barrel jacks and DC power supply connectors
- Can be made portable without having bothersome wire
- Battery power option means one does not have to be near an electric outlet
- Flat profile keeps it in place on work area
- Powers many types of grass dispensers that among other things, allow for quick and easy changing of static grass
The Applicator
This image shows the fully assembled kit with an added strainer type grass hopper.
One can power it in one of two ways.
The 9vDC battery option is shown on the left. The 12v DC option is connected to the input power receptacle which is located at the bottom center.
The Parts
This image shows the parts, less the container, used to assemble the kit.
They are the 15kv DC generator, male and female banana connectors, two solderless connectors, a 2.5 mm barrel jack, a battery clip, a special high voltage insulated switch, an alligator clip. a female 2.5 mm power receptacle, and a Wago connector.
You supply the wires to connect to the grounding alligator clip, and the grass dispenser of your choice.
You can get the applicator kit here.
The container is high impact polystyrene box that measures 13 cm square by 4 cm deep.
This is what you have with the container closed.
You can power the applicator with a 9v DC battery attached to the battery clip. You can see it at the top right in the image.
You can also use a standard 12v DC power source such as a wall-wart. The white tip of a wall-wart at the center bottom of the image.
Run wires from the male banana clip connectors to the alligator clip and dispenser.
This is what it looks like when wired up in my favorite configuration.
The small strainer is but one of many types of grass hoppers that you can use with this static grass applicator.
The power source I use depends on my surroundings. If the wire from the wall-wart would be a bother, I shift to the battery.
The generator is so powerful that I hardly see any degradation in performance when using the battery.
As a matter of fact, many of our customers have told us that they use the the battery all the time.
Tools For Making Realistic Scenery Using Static Grass And Flock
The page under this link shows you how many different types of dispensers that you can use. The information is well worth reading. Click here.
Video Demonstration
To watch us use this laying static grass, click either on the image or here.
Get a free copy of our illustrated guide on how to assemble this applicator by clicking here.
Feedback
Your questions and comments help us clarify and upgrade the information presented. Even if you find this helpful, please tell us.
Please let us know if this page has been helpful And if you have questions or suggestions, use this spam free system.
Or use the green WhatsApp button that is to the right.